HYPERTEX® REPELLIX - Textile
HyperTEX® Repellix is 2 component silicone elastomer which is addition curing system. It is suitable for direct printing by adding HyperTEX® Active Catalyst into the silicone.
No solvent
Good adhesion on fabric
No color changes after curing
Excellent washing durability
Suitable viscosity for printing
Excellent silky touch effect
High and low heat resistance
Good elongation
Excellent cracking resistance
HyperTEX® Repellix silicone is mixed with HyperTEX® Active Catalyst at recommended mixing ratio. (100:1-100:3)
After catalyst is added in silicone, curing starts. Curing time can be accelerated with high temperatures. . The amount of catalyst can be changed depending on the applied temperature.
HyperTEX® Active Retarder can be used to extend screen open time in extreme climates. Pallets should be preheated to 60°C before printing to produce best results. Recommended curing temperature is below
140°C.
Appearance
Visual:Transparent
Mixing Ratio:100:1-100:3
Hardness (Shore A):31±2
Tensile Strength (MPa):3,5
Density ( g/cm3):1,05-1,11
Tear Strength (KN/m):12,0
Elongation (%):400